Universal Lathes with centers height 210 - 330 mm

CU400, CU500 CU400M, CU500M, CU580M CU400MRD, CU500MRD, CU580MRD CU502, CU582, CU662
     
    CU400 CU500 CU400M CU500M CU580M CU502 CU582 CU662
CAPACITY:
Centers height mm 210 245 220 250 290 250-260 290 330
Swing over bed mm 440 500 440 500 580 500-520 580 660
Swing over cross slide mm 230 300 240 300 380 300-320 380 470
Swing in gap mm 620 670 640 700 780 690-710 770 850
Width of bed mm 360 400 400
Distance between centers mm 1000, 1500,2000 1000, 1500, 2000, 3000, 4000, 5000 1000, 1500, 2000, 3000, 4000, 5000
SPINDLE:
Spindle bore mm 62 72 72-104
Spindle nose DIN 55027 No. 8 8 8-11
Spindle taper Metric 80 80 80-120
HEAD STOCK:
Number of spindle speeds   21 21 16
Spindle speed range rpm 20-2000 20-2000 11,2 - 2000 11.2 - 2000 11,2 2000
(9-1600)
Main motor power mm 7.5 (11) 7.5 (11) 5,5-7,5 7,5-11 7,5-11
FEEDS:
Number of feeds   120 120 144
Longitudinal feed range mm/rev 0.39-12 0.039-12 0.039-24
Cross feed range mm/rev 0.018-6 0.018-6 0.0195-12
THREADS:
Number of threads   64 64 72
Metric thread range mm 0.5-120 0.5-120 0.5-240
Inch thread range tpi 60-1/4 60-1/4 60-1/8
Module thread range Module 0.125-30 0.125-30 0.125-60
DP thread range DP 240-1 240-1 240-0.5
CARRIAGE:
Cross slide travel mm 250 315 310 320 360
Top slide travel mm 130 130 140
TAIL STOCK:
Quill diameter mm 70 75 75
Quill taper Morse No.5 No.5 No.5
Quill travel mm 220 230 250
- 1500 mm Kg 2360 2430 2750 2800 2860 3120 3240 3360
- 2000 mm Kg 2560 2630 2900 2950 3010 3360 3480 3600
- 3000 mm Kg - 3150 3200 3260 4030 4150 4370
OPTIONS:
RD VERSION

Lathes available with infinitely variable spindle speed through frequency inverter in 3-subranges:

- Models CU400 MRD, CU500 MRD, CU580 MRD: Ranges 25-100; 100-400; 500-2000 RPM

- Models CU502RD, CU582RD, CU662RD: Ranges RPM 8-63; 60-500; 240-2000 RPM

Special accessories

Printable version

IVEX-M Ltd tel: +359 2 874 03 94; fax: +359 2 974 40 91 e-mail: ivex@trading.bg