Hand - pallet - truck ÒÊ 1,0-… ; ÒÊ 2,3-… ; ÒÊ 3,0-…
The hand-pallet- truck with built in relief valve works in store rooms and area with smooth surface.
|Type|| T max |
| G |
| TK 1,0-1 |
| ÒÊ 1,0-2 |
| ÒÊ 1,0-3 |
| ÒÊ 1,0Â 680 |
TK 2.3B 680
ÒÊ 3,0Â 680
Hand pallet weight truck Type TK-V 1,0
The weight measuring device TK - V 1,0 is intended specifi-cally for weighing of palletised and other cargo, transported by hand pallet truck, where it is required to meassure in tran-sit, avoiding the use of separate balances.
Hand-pallet-trick with hinget frame ÒÊ 2,3-PV
For taking loads of higher underpassing heights, from 150 - 280 mm
Scissors hand - pallet - truck TK1N-08
Scissors truck TK1N-08 may be used as a hand-pallet-truck and as a working table. On custumer's wish we may produce this truck with rub-ber or vulkolan wheels and quick lifting.
Hand piston pump Type PRB
It is built in hand-pallet-trucks and serves to trasform manpower in pro-gressive motion of piston. By meams of manpower and arm system of the shasy are realized lifting, lowering and lag of lifting load during trans-port. Built in elements are protected hand-piston pump by destroging and lowering speep with or without load is practical the same.
Hand - pallet - truck type TK 2,3 N
|The hand-pallet- truck manufactured by cold rolled stainless steel and works in store rooms and area with smooth surface. Load capacity 2300 kg. |
The handle has three possitions:
The stearing wheels and therollers are made from polyurethane tyres.
Load-lifting capacity: 1000, 2000 and 2500 kg
Height of lifting: 115 mm
Length of the forks: from 750 up to 1800 mm
Width of the forks: 540, 685 mm
Load-lifting capacity: 1000 kg
Height of lifting: 800 mm
Length of the forks: 1120 mm
Width of the forks: 540 mm
IVEX-M Ltd tel: +359 2 874 03 94; fax: +359 2 974 40 91 e-mail: firstname.lastname@example.org